AkoPrint
Acoustics and image in one panel: sound-absorbing cotton, taut fabric, your design. For wall, ceiling or freestanding as a room divider.
- 3
- configurations: wall, ceiling, freestanding
- 45 mm
- acoustic cotton per layer
- Made to measure
- frame, fabric and print
Which AkoPrint suits your project?
Three configurations, the same principle: a frame with acoustic filling and printed fabric.
AkoPrint
AcousticAluminium frame, acoustic cotton and a tautly stretched printed fabric.
Wall panels in three versions
From the slim basic panel to the frame with replaceable fabric. All three filled with recycled cotton.
Acoustic value per configuration
The NRC value says how much sound a panel absorbs: 1.0 is everything, 0 is nothing.
Specifications and artwork
These requirements come live from our product system and are therefore always up to date.
Downloads for AkoPrint
Material passport, artwork specifications and specification texts.
Frequently asked questions about AkoPrint
How are the panels fitted?
Wall panels are screwed to the wall or hung with hanging brackets. Ceiling panels hang on steel cables just below the ceiling; the air gap this creates enhances the effect. Partition walls stand freely on base plates.
You can fit them yourself with our instructions, or our installation team does it on site.
Can I replace the print later?
Yes, with the frames with replaceable fabric. You order a loose fabric with a new print and stretch it into the existing frame.
Need expert advice?
Raymon thinks along with you about material, technical requirements and artwork. Free and without obligation.